Safety Offset

This section describes the Safety Offset table and how you can customize it.

This page discusses:

Overview

This section provides a brief overview of the Safety Offset table.

The Safety Offset table allows you to define an offset value for a equivalent diameter that ensures the required clearance between routes or between routes and other surfaces.

Table Description

This section describes the customization options of the Safety Offset table.

A typical Safety Offset table is shown below:

Equivalent Diameter SafetyOffset
1in 50mm
2in 100mm
3in 150mm
4in 200mm
5in 250mm

The columns definitions are as follow:

Column Name Column Type Link to Table Link to Column
Equivalent Diameter Nominal Size HVAC Equivalent Diameter Equivalent Diameter
SafetyOffset Length - -

The table has the following attributes:

  • Fluid
  • Fluid category
  • Maximum temperature
  • Minimum temperature
  • Standard

Where Used

Used in this app When Is seen as
HVAC 3D Part Design
  • Parallel routing
  • Offset manipulator
 -