Creating a Slope on a Route

Slope lets you create a slope on a route to allow the fluid flows due to the gravity from a high point to a low point.

Note: Slope is not allowed between two ports or between a port and a directional point.

  1. Click the node on which you want to apply a slope.
    The anchor is moved to the node before the current node.
  2. In the Slope panel, select the options of your choice.
  3. Enter a value in the Local angle, Local percentage, or Local length box:
    The slope is added on the segment by moving the end point in the Z-axis direction.
  4. Select the other nodes on which you want to apply a slope and repeat steps 4 to 7.