Geometrical Information Section

In HVAC Design, when you select a duct, the Geometrical Information section appears. It gives information about the geometry of the selected duct. Depending on whether you are in Assembly or Reference only, different properties appear.

This page discusses:

See Also
About the Data Information Panel
Object Selection

In Assembly

In Assembly, when you select a duct, the section displays the following properties:

Note: All the properties, except the Route Color property, are a concatenation of:
  • The Turn Rule table
  • The Minimum Straight Length table
Name Description Editable
Wall Thickness Defines the wall thickness of the selected duct.
Default Bend Radius Defines the default bend radius of the selected duct.
Minimum Straight Length Defines the minimum straight length of the selected duct.
Route Color Defines the color of the duct.

To edit the color of the selected duct using the Route Color property:

  1. Double-click the color value and then click the color rectangle to display the color picker.
  2. Click one of the available tabs.
  3. Select the color of your choice.

For more information, see Using the Color Chooser.
Reference Bend Radius Defines the reference bend radius of the selected duct.

In Reference Only

In Reference only, when you select a duct, the section displays the following properties:

Name Description Editable
Wall Thickness Defines the wall thickness of the selected duct.
Route Color Defines the color of the duct.

To edit the color of the selected duct using the Route Color property:

  1. Double-click the color value and then click the color rectangle to display the color picker.
  2. Click one of the available tabs.
  3. Select the color of your choice.

For more information, see Using the Color Chooser.
Reference Bend Radius Defines the reference bend radius of the selected duct.