You can route a flexible duct through a support.
Before you begin: Open a product containing a support.
- In the Data Information panel, select Flexible as Route Type.
- From the Fluid Design section of the action bar, click Create Route .
-
Click .
The
Create directional point at port selection option enables you to add a directional point to define a straight portion on the flexible route between the port and the directional point.
Note:
Click Do not create directional point at port selection if you do not want to add a straight portion.
- Click the support you want to route the flexible duct through.
The Straight Distance from Port dialog box appears.
- Type a distance value.
- Select the port of the support.
The directional point is created at the distance you defined.