Performing a Leveling Analysis

You can calculate a leveling analysis.

This task shows you how to:

Before you begin:
  • You must have access to the ICEM Shape Morphing app.
  • Open a 3D shape containing two surface clusters.
See Also
Leveling Analysis Dialog Box

Create a Leveling Analysis with Extended Surface

  1. From the Analysis section of the action bar, click Leveling Analysis .
  2. In the Source Extension list, select None and Tangential in the Target Extension list.
  3. In the Display area, specify the value 1 for Scale and change the Envelope color to blue.
  4. Select a surface as Source and another surface as Target (selection field Tangential).


  5. Click Apply to create the leveling analysis with extended surface.


Create a Leveling Analysis with Extended Edge

  1. From the Analysis section of the action bar, click Leveling Analysis .
  2. In the Source Extension list, select Edge and None in the Target Extension list.
  3. Select the edges of the surfaces Source.2 to 5 as Source (selection field Edge), the surfaces Source.2 to 5 as Support, and the edges of the surfaces Target.2 to 5 as Target.


  4. Click Apply to create a leveling analysis with extended edge.


Create a Leveling Analysis with Extended Edge and Extended Surface

  1. From the Analysis section of the action bar, click Leveling Analysis .
  2. In the Target Extension list, select Tangential.
  3. Click the Tangential box and select the surface Target.1.
  4. Click Apply to create a leveling analysis with extended edge and extended surface.