Refitting Surfaces and Curves

You can adapt the shape of surfaces or curves to support elements.

Before you begin: Open a 3D shape containing a surface or a surface cluster and a surface to which the surface(cluster) shall be refit.
  1. From the Modification section of the action bar, click Refit .
  2. Select the surfaces of a surface cluster.
    In the tree, for each selected surface is displayed a refit element.

  3. Select a surface as support.
  4. Click OK.


Note: In case of constructions on top, the options Multi-Result and Single-Result in the Output tab are not available for subsequent edition, as updates cannot be guaranteed to be free of errors.