Creating a Loft Surface

OmniSurf lets you create loft surfaces of surface type Perpendicular Curves (N) and Curve Net.


Before you begin: Open a 3D Shape containing a curve net.
  1. Select two parallel curves as rail curves and an arbitrary number of curves running perpendicular to the rails and intersecting them.
  2. From the OmniSurf selector panel, click Perpendicular Curves (N) .
    A loft surface type Perpendicular Curves (N) is created.

    The exterior curves are used as rail and gen curves at which you can modify the continuities.

  3. Click OK.
  4. Select the curves of a curve net.
  5. Click OK.