-
Create a flange surface as described before.
-
In the OmniSurf panel, select the Edge Direction
Tangent
to create a flange surface extended in tangent direction from the selected support
surface edge.
-
Select Fix Direction
Z to create a flange surface in z direction of the
xy-OmniPlane (model coordinate system).
-
Use the robot to choose an individual vector direction.
-
Go back to Edge Direction Normal
and set an Angle unequal 0deg, for example -45deg.
If Length is set to True, the
flange length is measured along the actual direction.
-
Set Length to Height.
The flange length is measured along the basic direction.
|
