To review your kinematics simulation results, you can display a history that provides a
list of all the interference probes that have been included, and their detailed status.
The history consists of an immersive analysis interference list providing information on
probes for each time step of the simulation, including their name, detailed
specifications, issue types, intersecting products, and clearances values.
| Column Name |
Description |
| Time
|
Identifies the time step during which the interference
has been detected (for example 0s). |
| Probe
|
Identifies the name of the probe (for example,
interference.1). |
| Specification
|
Specifies the interference calculation mode that can
be either:
|
| System Status
|
Specifies the interference detailed status (clash,
contact, clearance). For example, if at t=5s a clash is detected
between product A and product B, the system status indicates
clash.
|
| Instance 1
|
Indicates the path to the first intersecting product
with respect to an up-bottom scheme (from the root product to the
product involved in the interference). For example:
Product\Product 1.1\intersecting_product.1.
|
| Instance 2
|
Indicates the path to the second intersecting product
with respect to an up-bottom scheme (from the root product to the
product involved in the interference). For example:
Product\Product 2.1\intersecting_product.2.
|
| Quantifier
|
Tracks the clearance's minimum distance or penetration
vector between the products involved in the interference, provided that
either the Minimum Distance or the
Penetration Vector check box has been
selected in the Specification tab of the
Interference Specifications dialog box. |
Select a line of interest in the history table to access a larger set of analysis tools
available in the Interference Management app.
The components involved in the selected interference appear in the work area, in the framework of the simulation step. You can analyze further the selected
interference using other analysis commands available in a specific context toolbar.