-
Enter the parameter title in the
Parameter tab and click the
Select Parameter Type tab.
The
Description field is not mandatory contrary to
the
Title one.
-
Create the parameter:
-
Select the type of the parameter from the
Type list.
When creating or editing dimensioned parameters, you can
decide to modify the parameter unit set in
Me > Preferences > 3D Modeling > Multi
Discipline Automated Engineering > Basics > Units. To do so,
use the
Display Unit list to select the unit. The
parameter value and its unit are displayed in the
tree.
-
Enter a value in the
Value box.
Entering a parameter value is not compulsory. The value box
can be left empty.
-
Optional: Select
Minimum Value or
Maximum Value if you want to apply bounds
to your parameter.
-
Optional: Select
Included if you want the bounds to be
included or excluded.
-
Optional: Enter the minimum/ maximum tolerance
value as well as the minimum/maximum precision values.
This option refers to the nominal value. When defined, this
value can be considered as an objective to reach. In this case, it lets you
define its validity range. This value can be expressed in percentage or in the
parameter unit.
-
Enter the minimum/maximum precision values. The precision
refers to the nominal value. This option lets you define an acceptable error on
the nominal value. The precision must be inferior to the tolerance. If not, it
is useless. This value can be expressed in percentage or in the parameter unit.
-
Select
Add Multi-values if you want your
parameter to have more than one value.
-
Select
Add authorized values if you want to limit
the possible values for your parameter.
Click
OK.
An aggregation relation is created between the object and the parameter you
created.