-
In the Building Grid dialog box, select the
Profile box and from the 3D area, select a sketch.
You can select a sketch that contains an output profile.
-
To change the number of stories for which the building grid is created, in
Number of Stories, enter a value.
-
From the Bottom Story list, select a story.
-
Expand Options and perform the following steps:
- To include slabs added to the project, click the Slab box and
select one or more slabs.
- To use a reference plane other than or in addition to the top story, click the
Reference Plane box and select one or more reference
planes.
Note:
You can select the Include foundation reference
planes check box to automatically include reference planes contained
in the foundation product.
-
In the Roof Thickness box, specify the distance from the top
of the uppermost story to the top of the virtual roof.
-
To transform the grid, perform the following steps:
-
Expand Scale and scale the grid.
-
Expand Twist and twist the grid.
-
Click the Spine box.
-
From the 3D area, select a spine.
-
Click
.
|