Creating Space

Space lets you create a space, which is a three-dimensional volume often surrounded by walls.

  1. In the Space dialog box, click Profile .
  2. In the 3D area, click the sketch or shape serving as the basis for the space.
  3. To change the space height, drag the height handle.

    As you adjust the height, the system displays a ruler. Alternatively, enter the height in the value box.

    Note: If you selected a shape as the basis for your space, the space height is determined by the shape. The system does not display a ruler to adjust the height.

  4. To remove walls, in the Space dialog box, click Remove Walls .

    Remove Walls is a toggle. When you remove walls, the system highlights the toggle.

  5. To determine wall position, from Outside , click one of the following:
    • Outside for walls outside the space.
    • Inside for walls inside the space.
    • Both Sides for walls on both sides of the space.

    The wall positioning options are only available if you include walls.

  6. Click .
  7. To move or rotate a space:
    1. Click the space.
    2. Use the Robot to manipulate the space.

 

See Also
More help on this topic