-
From the
Openings From Floor Plan dialog box, click
Select the floor plan sketch and in the
tree,
select the floor plan sketch.
-
To change the owning story of the openings, in the dialog box,
select an option from
Owning story.
-
From the
Openings From Floor Plan dialog box, select:
| Option | Description |
|---|
Concept Opening
|
Creates a concept opening. |
|---|
Concept Door
|
Create a concept door. |
|---|
Concept Window
|
Create a concept window. |
|---|
-
In the dialog box:
-
Enter in
Component Height the height of the
openings you are creating.
-
Enter in
Sill Height the height of the foot of the
openings from the floor.
-
Enter in
Max Door Width a value to reflect the
maximum door width in the floor plan.
Note:
Your entry for
Max Door Width is the largest distance
the tool attempts to identify as a door or opening. The tool does not create
doors or openings in distances larger than your value. Discontinuities along
walls larger than this value will result in a gap in the wall.
-
Enter in
Min Space Area a value that reflects the
minimum space area in the floor plan.
Note:
Your entry is the smallest area that the tool considers for
a space. The tool does not create openings, doors or windows for areas smaller
than your value.
-
Enter in
Max Wall Thickness a value that reflects
the maximum thickness of walls in the floor plan.
Note:
Your entry is the maximum thickness that the tool considers
for a wall.
-
To convert all openings in the sketch to openings, doors or
windows, click
Generate All
.
-
To see a preview of what the software considers valid walls,
spaces and openings, click
Show Analysis
.
-
Click
.
The system creates the
openings both in the
3D area
and in the
tree,
where it lists them under the owning story.