Panel Definitions

This section defines the naming conventions used in the Panel Definition list.

Designator	Description
G	Glazed panel
S	Solid panel
Simple	Single panel
Angled	Single panel that can be translated away from the panel wall surface and angled.
Config	Single panel with configurable mullions and miter angles left and right
2V	Two panels stacked vertically with unique heights
3V	Three panels stacked vertically with unique heights
XV	User specified number of panels stacked vertically and of uniform height
XH	User specified number of panels stacked horizontally and of uniform width
SE	Includes a start and end panel (left and right horizontally) with unique widths
Surface	Surface-driven panel that matches the curvature of the host surface.

This section provides a table covering all the features of each panel type in the Panel Definition list.

Name	Style	Vertical Panels	Horizontal Panels	Start & End Panels	Miter Angles	Configurable Mullions	Comment
G-Simple	Glazed	1	1	No	No	No	-
S-Simple	Solid	1	1	No	Yes	No	-
S-Simple-Angled	Solid	1	1	No	Yes	N/A	Includes Panel Angle and Panel Translate options.
G-Config	Glazed	1	1	No	Yes	Yes	-
G-XV_XH	Glazed	Varies	Varies	No	No	No	-
S-XV_XH	Solid	Varies	Varies	No	No	No	-
G-2V_XH	Glazed	2	Varies	No	No	No	-
G-2V_XHSE	Glazed	2	Varies	Yes	No	No	-
G-3V_XH	Glazed	3	Varies	No	No	No	-
G-3V_XHSE	Glazed	3	Varies	Yes	No	No	-
G-Simple-Surface	Glazed	1	1	No	No	No	Available only for Surface Driven Panels
S-Simple-Surface	Solid	1	1	No	Yes	No	Available only for Surface Driven Panels