Robot Commands
The Robot is available in the 3D design view only.
-
Activate Robot Copilot
- Turns on the Robot Copilot. This command is selected by default.
-
Constrain U, V or W Axis
- Moves the Robot on the constraint only.
To facilitate your actions, when constrained to a curve, only the main axis of the Robot is visible.
Note:
Some deformations require you to constrain a Robot axis before performing the operation.
-
Disconnect and Orient Robot
- Disconnects the Robot and lets you orient it independently of selected geometry, while keeping the selected geometry active.
Note:
Once disconnected, the Robot is no longer orange, but gray.
You can also click the handle at the center of the Robot to disconnect it.
-
Reconnect Robot
- Reconnects the Robot to selected geometry.
You can also click the handle at the center of the Robot to reconnect it.
-
Freeze Robot Position
- Turns off the snap behavior of the Robot and lets you select geometry without having the Robot snap to it.
-
Change Robot Type
- Restricts the number of Robot functions provided.
-
Create Mirror Plane
- Creates a mirror plane in the same plane as the base of the Robot and lets you create and work on symmetrical geometry.
You can create up to three perpendicular planes.
-
Edit
- Edits Robot parameters letting you manipulate objects precisely.
3D Design-Turntable Switch Commands
The 3D Design-Turntable switch is available in both the 3D design and turntable views.
In the 3D design view , you can customize the display of 3D bounding boxes and how boxes fit around geometry.
- Create Fillet
- From an advanced-type face, creates a fillet that has the same radius as adjacent constant-radius fillets. The advanced face (NURBS surface or lofted surface) must be bordered by and have tangent continuity with adjacent fillets, and all adjacent fillets must have the same radius.
- To access this command, you must first select the Hide/Show Color-Coding for Surfaces contextual command.
- This command is particularly useful when importing geometry from another app.
-
No boxes
- Never shows bounding boxes.
-
No boxes on select, full boxes on explore
- Shows no boxes when you select a part; shows the full set of bounding boxes when you explore the structure.
-
Movable set box on select, full boxes on explore
- Shows a single bounding box when you select a part; shows the full set of bounding boxes when you explore the structure. This is the default option.
-
Full boxes on select and explore
- Shows the full set of bounding boxes both when you select a part and when you explore the structure.
-
Orientate boxes to fit geometry
- Orients box edges around the geometry. This is the default option.
-
Orientate boxes on XYZ
- Orients box edges along XYZ axes.
In the turntable view , you can customize this view.
-
Orient objects on tables
- Optimizes the arrangement of objects on turntables by taking their shape and natural orientation into account.
-
Size linearization factor
- Controls the appearance of objects of different sizes. When the slider is set to 0, objects appear in their original sizes; when the slider is set to 1, all objects on turntables have the same size.
App-specific Search Results
panel Commands
The Search Results
panel is available in both the 3D design and turntable views.
-
Insert
- Inserts the selected item into the current tab.
- Alternatively, double-click to insert.
-
Smart Insert
- Inserts the selected item into the current tab ready for you to place it. The item is attached to the pointer. Click to position it.
- Alternatively, drag an item from the Search Results
panel to the current tab.