Positioning the Plastic Case

In the last three steps, you will use three different ways to move and assemble parts. In this step, you will use the Robot to position the plastic case.

To move the two halves of the plastic case into position, you need to return to the design view.

Click Play to watch the video:

  1. Click the 3D Design-Turntable switch in the lower-right corner.
    You'll notice that you return to the design view.
  2. If not visible, double-click anywhere inside the viewing zone to see all the assembly.
  3. Select the end face of the bottom half of the case.
  4. Drag the perpendicular axis of the Robot toward the connector.

    Notice that you need to turn the part to see the connector face.

  5. Release the mouse when a coincidence relationship is detected with the rear face of the connector.
  6. When finished, click the background.

Next step: Assembling the Two Case Halves.