Accommodation Design Parameters

Ceiling


Parameter	Value	Description
Ceiling > Draw	Yes/No	Draws 2D representation of a ceiling. By default, the value is Yes.
Ceiling > Layer	Integer	Specifies a layer number for the ceiling representation. By default, the value is -1.
Ceiling > GraphicReplacement	Yes/No	Indicates whether or not to use graphic replacement property. By default, the value is Yes.
Ceiling > AngularTolerance	Degrees	By default, the value is 15.
Ceiling > ViewType	SideView/AnyView	Defines two types of views for ceiling.
Ceiling > ViewType > SideView > Draw	Yes/No	Draws the object from top side. By default, the value is Yes.
Ceiling > ViewType > SideView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 1.
Ceiling > ViewType > SideView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 5.
Ceiling > ViewType > SideView > LineColor	3DInheritance/ Color
Ceiling > ViewType > SideView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Ceiling > ViewType > SideView > LineColor > Color	String	Specifies a color value when you select No for 3DInheritance.
Ceiling > ViewType > SideView > AnnotationTextStyle		Creates an annotations text and specifies the annotation text styles.
Ceiling > ViewType > SideView > AnnotationTextStyle > Draw	Yes/No	Creates an annotation text. By default, the value is Yes.
Ceiling > ViewType > SideView > AnnotationTextStyle > ATS_AutoPosition	Yes/No	Decides to create a leader or not. By default, the value is Yes.
Ceiling > ViewType > SideView > AnnotationTextStyle > ATS_CharacterOffset	Integer	Sets offset between an anchor point and text. By default, the value is 0.
Ceiling > ViewType > SideView > AnnotationTextStyle > ATS_ChapterName	String	Specifies the name of the chapter from the annotation catalog set in Data Setup.
Ceiling > ViewType > SideView > AnnotationTextStyle > ATS_Attribute	String	Lists the attributes of the feature to be displayed in the annotation text.
Ceiling > ViewType > AnyView > Draw	Yes/No	Draws the object from any side. By default, the value is Yes.
Ceiling > ViewType > AnyView > AreaFill		Creates an area fill and defines its parameters.
Ceiling > ViewType > AnyView > AreaFill > Fill	Yes/No	Creates an area fill. By default, the value is Yes.
Ceiling > ViewType > AnyView > AreaFill > FillMethod		Specifies the fill method (3DInheritance/Rule/Color/Hatching/Dotting/Material).
Ceiling > ViewType > AnyView > AreaFill > Color	Color	Specifies the color for the Color fill method.
Ceiling > ViewType > AnyView > AreaFill > Hatching		Specifies the parameters for the Hatching fill method.
Ceiling > ViewType > AnyView > AreaFill > Hatching > Angle	Degrees	Specifies the angle of hatching in degrees. By default, the value is 45.
Ceiling > ViewType > AnyView > AreaFill > Hatching > Pitch	Integer	Specifies the pitch of hatching. By default, the value is 5.
Ceiling > ViewType > AnyView > AreaFill > Hatching > Offset	Integer	By default, the value is 5.
Ceiling > ViewType > AnyView > AreaFill > Hatching > LineType	Integer	Sets the type of line for hatching. By default, the value is 1.
Ceiling > ViewType > AnyView > AreaFill > Hatching > LineThickness	Integer	Specifies the thickness of line for hatching. By default, the value is 1.
Ceiling > ViewType > AnyView > AreaFill > Hatching > LineColor	3DInheritance/ Color	Specifies the color of line for hatching.
Ceiling > ViewType > AnyView > AreaFill > Dotting		Specifies the parameters for Dotting fill method.
Ceiling > ViewType > AnyView > AreaFill > Dotting > ZigZag	Yes/No	Creates the dotting in zigzag manner. By default, the value is Yes.
Ceiling > ViewType > AnyView > AreaFill > Dotting > Color	3DInheritance/ Color	Specifies the color for dotting.
Ceiling > ViewType > AnyView > AreaFill > RuleName	String	Specifies the rule for the Rule fill method. By default, the value is FillID.

Insulation and Fire Bridge


Parameter	Value	Description
Insulation > Draw Fire Bridge > Draw	Yes/No	Draws 2D representation. By default, the value is Yes.
Insulation > Layer Fire Bridge > Layer	Integer	Specifies a layer number for 2D representation. By default, the value is 2.
Insulation > GraphicReplacement Fire Bridge > GraphicReplacement	Yes/No	Indicates whether or not to use graphic replacement property. By default, the value is Yes.
Insulation > AngularTolerance Fire Bridge > AngularTolerance	Degrees	Indicates the angular tolerance value in degrees. By default, the value is 15.
Insulation > ViewType Fire Bridge > ViewType	SideView/ TopView/ AnyView	Defines three types of views for insulation.
Insulation > ViewType > SideView > Draw Fire Bridge > ViewType > SideView > Draw	Yes/No	Draws the object from side view. By default, the value is Yes.
Insulation > ViewType > SideView > LineType Fire Bridge > ViewType > SideView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 4 for an insulation. By default, the value is 3 for a fire bridge.
Insulation > ViewType > SideView > LineThickness Fire Bridge > ViewType > SideView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 1 for an insulation. By default, the value is 3 for a fire bridge.
Insulation > ViewType > SideView > LineColor Fire Bridge > ViewType > SideView > LineColor	3DInheritance/ Color
Insulation > ViewType > SideView > LineColor > 3DInheritance Fire Bridge > ViewType > SideView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Insulation > ViewType > SideView > LineColor > Color Fire Bridge > ViewType > SideView > LineColor > Color		Specifies a color value when you select No for 3DInheritance.
Insulation > ViewType > TopView > Draw Fire Bridge > ViewType > TopView > Draw	Yes/No	Draws the object from top side. By default, the value is Yes.
Insulation > ViewType > TopView > LineType Fire Bridge > ViewType > TopView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 4 for an insulation. By default, the value is 3 for a fire bridge.
Insulation > ViewType > TopView > LineThickness Fire Bridge > ViewType > TopView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 2 for an insulation. By default, the value is 3 for a fire bridge.
Insulation > ViewType > TopView > LineColor Fire Bridge > ViewType > TopView > LineColor	3DInheritance/ Color
Insulation > ViewType > TopView > LineColor > 3DInheritance Fire Bridge > ViewType > TopView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Insulation > ViewType > TopView > LineColor > Color Fire Bridge > ViewType > TopView > LineColor > Color		Specifies a color value when you select No for 3DInheritance.
Insulation > ViewType > AnyView > Draw Fire Bridge > ViewType > AnyView > Draw	Yes/No	Draws the object from any side. By default, the value is Yes.
Insulation > ViewType > AnyView > LineType Fire Bridge > ViewType > AnyView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 4 for an insulation. By default, the value is 3 for a fire bridge.
Insulation > ViewType > AnyView > LineThickness Fire Bridge > ViewType > AnyView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 3.
Insulation > ViewType > AnyView > LineColor Fire Bridge > ViewType > AnyView > LineColor	3DInheritance/ Color
Insulation > ViewType > AnyView > LineColor > 3DInheritance Fire Bridge > ViewType > AnyView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Insulation > ViewType > AnyView > LineColor > Color Fire Bridge > ViewType > AnyView > LineColor > Color		Specifies a color value when you select No for 3DInheritance.

Draught Stop


Parameter	Value	Description
Draught Stop > DraughtStopForVentilation > Draw Draught Stop > DraughtStopWithVentilation > Draw Draught Stop > Draw	Yes/No	Draws 2D representation. By default, the value is Yes.
Draught Stop > Layer		Specifies a layer number for 2D representation. By default, the value is 2.
Draught Stop > DraughtStopForVentilation > GraphicReplacement Draught Stop > DraughtStopWithVentilation > GraphicReplacement Draught Stop > GraphicReplacement	Yes/No	Indicates whether or not to use graphic replacement property. By default, the value is Yes.
Draught Stop > DraughtStopForVentilation > AngularTolerance Draught Stop > DraughtStopWithVentilation > AngularTolerance Draught Stop > AngularTolerance	Degrees	Indicates the angular tolerance value in degrees. By default, the value is 15.
Draught Stop > DraughtStopForVentilation > ViewType Draught Stop > DraughtStopWithVentilation > ViewType Draught Stop > ViewType	TopView/ AnyView	Defines three types of views for insulation.
Draught Stop > DraughtStopForVentilation > ViewType > TopView > Draw Draught Stop > DraughtStopWithVentilation > ViewType > TopView > Draw Draught Stop > ViewType > TopView > Draw	Yes/No	Draws the object from the top side. By default, the value is Yes.
Draught Stop > DraughtStopForVentilation > ViewType > TopView > LineType Draught Stop > DraughtStopWithVentilation > ViewType > TopView > LineType Draught Stop > ViewType > TopView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 4 for the draught stop for ventilation and the draught stop with ventilation. By default, the value is 2 for a draught stop.
Draught Stop > DraughtStopForVentilation > ViewType > TopView > LineThickness Draught Stop > DraughtStopWithVentilation > ViewType > TopView > LineThickness Draught Stop > ViewType > TopView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 4 for the draught stop for ventilation and the draught stop with ventilation. By default, the value is 2 for a draught stop.
Draught Stop > DraughtStopForVentilation > ViewType > TopView > LineColor Draught Stop > DraughtStopWithVentilation > ViewType > TopView > LineColor Draught Stop > ViewType > TopView > LineColor	3DInheritance/ Color
Draught Stop > DraughtStopForVentilation > ViewType > TopView > LineColor > 3DInheritance Draught Stop > DraughtStopWithVentilation > ViewType > TopView > LineColor > 3DInheritance Draught Stop > ViewType > TopView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Draught Stop > DraughtStopForVentilation > ViewType > TopView > LineColor > Color Draught Stop > DraughtStopWithVentilation > ViewType > TopView > LineColor > Color Draught Stop > ViewType > TopView > LineColor > Color		Specifies a color value when you select No for 3DInheritance.
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > Draw Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > Draw Draught Stop > ViewType > AnyView > Draw	Yes/No	Draws the object from any side. By default, the value is Yes.
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > LineType Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > LineType Draught Stop > ViewType > AnyView > LineType	Integer	Sets the type of line for 2D representation. By default, the value is 4 for the draught stop for ventilation and the draught stop with ventilation. By default, the value is 2 for a draught stop.
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > LineThickness Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > LineThickness Draught Stop > ViewType > AnyView > LineThickness	Integer	Sets the thickness of line for 2D representation. By default, the value is 4 for the draught stop for ventilation and the draught stop with ventilation. By default, the value is 2 for a draught stop.
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > LineColor Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > LineColor Draught Stop > ViewType > AnyView > LineColor	3DInheritance/ Color
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > LineColor > 3DInheritance Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > LineColor > 3DInheritance Draught Stop > ViewType > AnyView > LineColor > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Draught Stop > DraughtStopForVentilation > ViewType > AnyView > LineColor > Color Draught Stop > DraughtStopWithVentilation > ViewType > AnyView > LineColor > Color Draught Stop > ViewType > AnyView > LineColor > Color		Specifies a color value when you select No for 3DInheritance.

Sill


Parameter	Value	Description
Sill > Draw	Yes/No	Draws 2D representation of a sill. By default, the value is Yes.
Sill > Layer	Integer	Specifies a layer number for 2D representation. By default, the value is -1.
Sill > Angular Tolerance	Degrees	Indicates an angular tolerance value in degrees. By default, the value is 15 degrees.
Sill > View Type	Top View/Any View
Sill > View Type > Top View > Draw	Yes/No	Projects the trace of a section with an arrow symbol. The direction of the arrow depends on the flange direction. By default, the value is Yes.
Sill > View Type > Top View > Draw > Line Type	Integer	Sets the type of a line for 2D representation. By default, the value is 1.
Sill > View Type > Top View > Draw > Line Color > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Sill > View Type > Top View > Draw > Line Color > Color	RGB	Specifies a color value when you select No for 3DInheritance. By default, the value is Black.
Sill > View Type > Top View > Draw > Line Thickness	Index	Sets the thickness of line for 2D representation. By default, the value is 1.
Sill > View Type > Top View > Draw > Flange Symbol	Yes/No	Specifies whether or not to use flange symbol. By default, the value is Yes.
Sill > View Type > Any View > Draw	Yes/No	Projects a sill body. By default, the value is Yes.
Sill > View Type > Any View > Draw > Line Type	Integer	Sets the type of a line for 2D representation. By default, the value is 1.
Sill > View Type > Any View > Draw > Line Color > 3DInheritance	Yes/No	Inherits the color of the 3D object. By default, the value is No.
Sill > View Type > Any View > Draw > Line Color > Color	RGB	Specifies a color value when you select No for 3DInheritance. By default, the value is Black.
Sill > View Type > Any View > Draw > Line Thickness	Index	Sets the thickness of line for 2D representation. By default, the value is 1.

Component


Parameter	Value	Description
Component > Draw	Yes/No	Draws 2D representation. By default, the value is Yes.
Component > Angular Tolerance	Degrees	Indicates the angular tolerance value in degrees. By default, the value is 15 degrees.
Component > Elevation Tolerance
Component > Draw Method	2DLayout / 3D Projection / Business Rule	By default, the value is 3D Projection.
Component > AGTCabin > Draw Component > AGTHandRail > Draw Component > AGTDoor > Draw Component > AGTStair > Draw Component > AGTFurniture > Draw Component > AGTBaseBoard > Draw Component > AGTProtectedCorner > Draw Component > AGTSafetySign > Draw Component > AGTDecorativeSign > Draw Component > AGTExtinguisher > Draw	Yes/No	Draws a cabin, hand rail, door, stair, furniture, base board, protected corner, safety sign, decorative sign, and extinguisher, respectively. By default, the value is Yes.
Component > AGTCabin > Layer Component > AGTHandRail > Layer Component > AGTDoor > Layer Component > AGTStair > Layer Component > AGTFurniture > Layer Component > AGTBaseBoard > Layer Component > AGTProtectedCorner > Layer Component > AGTSafetySign > Layer Component > AGTDecorativeSign > Layer Component > AGTExgtinguisher > Layer	Integer	Specifies a layer number for 2D representation. By default, the value is -1.
Component > AGTCabin > Draw Method Component > AGTHandRail > Draw Method Component > AGTDoor > Draw Method Component > AGTStair > Draw Method Component > AGTFurniture > Draw Method Component > AGTBaseBoard > Draw Method Component > AGTProtectedCorner > Draw Method Component > AGTSafetySign > Draw Method Component > AGTDecorativeSign > Draw Method Component > AGTExgtinguisher > Draw Method	2DLayout / 3DPart / Business Rule	Specifies whether to use 2DLayout, 3DPart, or business rule method for drawing. By default, the value is 2DLayout.