|
Extraction
|
yes/no
|
Determines whether the 3D working support should be extracted
or not (default value = No).
|
|
Grid step ratio for increasing grid limit
|
integer
|
Specifies the minimum distance (in percentage of a square)
between the grid limit and the geometry (default value = 10). If the distance
is lower than the defined value, a square is added to the grid.
|
|
Lines > Color
|
color
|
Defines the color of the grid's lines (default value =
Black).
|
|
Lines > Linetype
|
integer
|
Defines the linetype of the grid's lines (default value
= 1).
|
|
Lines > Thickness
|
integer
|
Defines the thickness of the grid's lines (default value
= 1).
|
|
Labels > Type
|
Inherited from 3D labels/LWH/XYZ
|
Defines the labels' type (default value = Inherited from
3D labels).
|
|
Labels > Position > Horizontal
|
None/Left/Right/Both sides
|
Defines the position of the horizontal labels (default
value = None).
|
|
Labels > Position > Vertical
|
None/Top/Bottom/Both sides
|
Defines the position of the vertical labels (default value
= None).
|
|
Labels > Font > Name
|
font
|
Defines the labels' font name (default value = Arial).
|
|
Labels > Font > Size
|
integer
|
Defines the labels' font size (default value = 10).
|
|
Labels > Font > Color
|
color
|
Defines the labels' font color (default value = Black).
|
|
Labels > Font > Bold
|
yes/no
|
Specifies whether the labels' font should be bold or not
(default value = No).
|
|
Labels > Font > Italic
|
yes/no
|
Specifies whether the labels' font should be italic or
not (default value = No).
|