View Dress-up Parameters

View dress-up parameters are located in the Drafting > ViewDressup node of the generative view style XML file. (available through Me > Preferences > Standards > generativeparameters category > *.XML file). These parameters define the style of the various parameters which deal with the dress-up of the view.

Important: All generative view styles apply to views generated in exact mode. On top of that, some generative view style parameters also apply when creating other view types (CGR, Approximate and Raster), as specified by a note for each concerned view dress-up element.
Note: The information in this section is presented in a context, but it is identical in 2D Layout for 3D Design app.

The following are discussed:

This page discusses:

See Also
About View Dress-up Parameters

Operators

You can configure parameters for section, detail, break and breakout.

Section

In the image below, the section profile parameter is displayed in red.



Parameters Value Description
Section > Visible

yes/no

Specifies whether or not the section profile should be visible.
Section > Color

color

Determines the color of the section profile.
Section > Linetype

integer

Determines the line type used for the section profile.
Section > Thickness

integer

Determines the line thickness used for the section profile.
Section > PartialSectionEdge

Standard/Wavy

Determines the type of section edge used for the section profile.

Skin Section





Parameter Name

Value

Description

Section > SkinSection > Color

color

Determines the color of the skin section profile.

Section > SkinSection > Linetype

integer

Determines the line type used for the skin section profile.

Section > SkinSection > Thickness

integer

Determines the line thickness used for the skin section profile.

Solid Section



Parameter Name

Value

Description

Section > SolidSection > Color

color

Determines the color of the solid section profile.

Section > SolidSection > Linetype

integer

Determines the line type used for the solid section profile.

Section > SolidSection > Thickness

integer

Determines the line thickness used for the solid section profile.

Detail



Parameter Name

Value

Description

Detail > Visible

yes/no

Specifies whether or not the detail profile should be visible.

Detail > Color

color

Determines the color of the detail profile

Detail > Linetype

integer

Determines the line type used for the detail profile.

Detail > Thickness

integer

Determines the line thickness used for the detail profile.

Detail > CylinderLimitEdge

Standard

S Break representation

Determines the cylindrical limit edge for the detail profile.
Note: all parameters also apply to CGR, Approximate and Raster view types.

Break

Parameter Name

Value

Description

Break > Visible

yes/no

Specifies whether or not the break profile should be visible.

Break > Color

color

Determines the color of the break profile

Break > Linetype

integer

Determines the line type used for the break profile.

Break > Thickness

integer

Determines the line thickness used for the break profile.

Break > CylinderLimitEdge

Standard

S Break representation

Determines the cylindrical limit edge for the break profile.
Note: all parameters also apply to CGR, Approximate and Raster view types.

Breakout



Parameter Name

Value

Description

Breakout > Visible

yes/no

Specifies whether or not the breakout profile should be visible.

Breakout > Color

color

Determines the color of the breakout profile.

Breakout > Linetype

integer

Determines the line type used for the breakout profile.

Breakout > Thickness

integer

Determines the line thickness used for the breakout profile.

3DClipping



Parameter Name

Value

Description

3DClipping > Visible

yes/no

Specifies whether or not the 3D clipping profile should be visible.

3DClipping > Color

color

Determines the color of the 3D clipping profile.

3DClipping > Linetype

integer

Determines the line type used for the 3D clipping profile.

3DClipping > Thickness

integer

Determines the line thickness used for the 3D clipping profile.

3DInheritance

You can configure 3DInheritance parameters for wireframe, solid and 3Dpoints.

Wireframe

Parameter Name

Value

Description
Wireframe > Color

color

 Specifies whether wireframe color should be inherited from 3D.
Wireframe > Linetype

integer

 Specifies whether wireframe line type should be inherited from 3D.
Wireframe > Thickness

integer

 Specifies whether wireframe thickness should be inherited from 3D.
Wireframe > Layer Yes/No Specifies whether wireframe layer should be inherited from 3D.

Solid





Parameter Name

Value

Description
Solid > Color

color

 Specifies whether solid color should be inherited from 3D.
Solid > Linetype

integer

 Specifies whether solid line type should be inherited from 3D.
Solid > Thickness

integer

 Specifies whether solid thickness should be inherited from 3D.
Solid > Layer Yes/No Specifies whether solid layer should be inherited from 3D.
Note: all parameters also apply to Raster view types.

3DPoints





Parameter Name

Value

Description
3DPoints > Color

color

Specifies whether 3D points color should be inherited from 3D.
3DPoints > Linetype

integer

Specifies whether 3D points line type should be inherited from 3D.
3DPoints > Thickness

integer

Specifies whether 3D points thickness should be inherited from 3D.
3DPoints > Layer Yes/No

Specifies whether 3D points layer should be inherited from 3D.

GeneratedGeometry

You can configure GeneratedGeometry parameters for vivid edges, hidden edges, fillets, wireframe and 3Dpoints.

Vivid Edges



Parameter Name

Value

Description

VividEdges > Color

color

Determines the color of vivid edges.
VividEdges > Linetype

integer

Determines the line type used for vivid edges.
VividEdges > Thickness

integer

Determines the line thickness used for vivid edges.
Note: all parameters apply to CGR and Approximate view types.

Hidden Edges



Parameter Name

Value

Description
HiddenEdges > Color

color

Determines the color of hidden edges.
HiddenEdges > Linetype

integer

Determines the line type used for hidden edges.
HiddenEdges > Thickness

integer

Determines the line thickness used for hidden edges.
Note: all parameters apply to CGR and Approximate view types.

Wavy Edges



Parameter Name Value Description
WavyEdges > Color

color

Determines the color of wavy edges.
WavyEdges > Linetype

integer

Determines the line type used for wavy edges.
WavyEdges > Thickness

integer

Determines the line thickness used for wavy edges.

S Break Edges



Parameter Name Value Description
SBreakEdges > Color

color

Determines the color of S break symbol.
SBreakEdges > Linetype

integer

Determines the line type used for S break symbol.
SBreakEdges > Thickness

integer

Determines the line thickness used for S break symbol.
SBreakEdges > Filled

Yes

Determines the filling of the S break symbol.
SBreakEdges > Hollow

No

Determines the hollowness of S break symbol.
SBreakEdges > Ratio

integer

Determines the ratio of S break symbol size.

Fillets



Parameter Name

Value

Description

Fillets > Color

color

Determines the color of fillets.

Fillets > Linetype

integer

Determines the line type used for fillets.

Fillets > Thickness

integer

Determines the line thickness used for fillets.

Wireframe



Parameter Name

Value

Description

Wireframe > Color

color

Determines the color of wireframe.

Wireframe > Linetype

integer

Determines the line type used for wireframe.

Wireframe > Thickness

integer

Determines the line thickness used for wireframe.

3D Points



Parameter Name

Value

Description

3DPoints > Symbols

integer

Determines the symbol used for 3D points. Use O to inherit from the 3D symbol, use 1 to 8 to choose a custom symbol.