Weld Design Parameters

Weld Design parameters specify whether welds should be generated in the view.

Weld Design parameters can be customized in the Standard Definition dialog box through Me > Preferences > Standards. After selecting the generativeparameters category, you can then select the XML file you want to customize. Weld Design parameters are located in the Drafting > Generate node of this XML file.

Table 1. Generate
Parameter Value Description
Welds Yes/No Specifies how welding symbols must be generated.

If the value is set to Yes, welding symbols are generated according to the standards (defined in the Drafting preferences). If set to No, welding symbols are generated according to the 3D geometry.

By default, the value is set to No.

Weld Sections Yes/No Specifies whether the weld must be generated or not.

By default, the value is set to No.