Calibrate Dialog Box

The Calibrate dialog box, which appears when you select Calibrate in the Viewers Configuration toolbar.

This dialog box contains controls for:

This page discusses:

Calibration by superimposing

Calibration by superimposing
Select this option to calibrate by superimposing.
Selection 1
Select a reference line or axis in one of the drawings.
Selection 2
Select a line or axis in the other drawing that you want aligned to the reference.
Reverse
Select this check box to change the direction.

Calibration by resizing

Calibration by resizing
Select this option to calibrate by resizing or by offset.
Width
Modify the width of the drawings.
Height
Modify the height of the drawings.
Zoom
Modify the zoom factor applied to the drawings.
X
Enter offset values for the X axis.
Y
Enter offset values for the Y axis.