Properties for Configuring chemSHERPA

These properties configure the chemSHERPA configuration option.

For more information, see Configuring the chemSHERPA Data Management Option.

Properties Name Description Values
emxMaterialComplianceCentral.chemSHERPASupport Enables (on) or disables (off) support for chemSHERPA.
  • off
  • on
emxMaterialComplianceCentral.chemSHERPA.complianceDefinition.IEC62474IEC62474(2016-Jun-23).area Specifies the restriction area, similar to a compliance definition. IEC62474 is the only supported value. IEC62474
emxMaterialComplianceCentral.chemSHERPA.authority Specifies the authority responsible for the chemSHERPA. chemSHERPA is the only supported value. chemSHERPA
emxMaterialComplianceCentral.chemSHERPA.schemaDBVersion Defines the tool and version support. Only the shown values are supported. X6.01ex1.0
emxMaterialComplianceCentral.chemSHERPA.substanceDBVersion D12.00
emxMaterialComplianceCentral.chemSHERPA.toolNameVersionID.article chemSHERPA-A1.01.00@1.01.00
emxMaterialComplianceCentral.chemSHERPA.toolNameVersionID.chemical chemSHERPA-C1.01.00@1.01.00
emxMaterialComplianceCentral.chemSHERPA.partsPerZip Defines the number of XML files to create in a single zip file when generating the supplier report with the chemSHERPA report type.

The chemSHERPA import tool does not support more than 100 zip files. You can enter a smaller value, but not a larger value.

100
emxMaterialComplianceCentral.chemSHERPA.complianceDefinition Defines the compliance definition used for chemSHERPA. The shown value is the only supported value. IEC62474:IEC 62474 (2016-Jun-23)
emxMaterialComplianceCentral.chemSHERPA.import.compositionOnly When importing a .shai or .shci zip file, defines what the app does if the file only contains composition information.
  • import
  • error
  • ignore
emxMaterialComplianceCentral.chemSHERPA.import.complianceOnly When importing a .shai or .shci zip file, defines what the app does if the file only contains compliance information.
  • import
  • error
  • ignore
emxMaterialComplianceCentral.chemSHERPA.import.compositionAndCompliance When importing a .shai or .shci zip file, defines what the app does if the file contains both composition and compliance information.
  • import
  • error
  • ignoreCompliance
  • ignoreComposition
emxMaterialComplianceCentral.chemSHERPA.import.declaredSubstanceInconsistent emxMaterialComplianceCentral.chemSHERPA.import.complianceAndCompositionInconsistent When generating a supplier report for the chemSHERPA Article or Chemical report type, determines the action to take if a declared substance in the compliance declaration is not in the composition of the part.
  • error
  • ignore
emxMaterialComplianceCentral.chemSHERPA.import.aboveThresholdInconsistent Defines what action to take if a substance or substance classification shows as above threshold in the composition data, but not in the compliance section.
  • error
  • ignore
emxMaterialComplianceCentral.chemSHERPA.ReportTypes Defines the available report types for export.
  • ChemSHERPA Article Tool,ChemSHERPA Chemical Tool
  • ChemSHERPA Article Tool
  • ChemSHERPA Chemical Tool
emxMaterialComplianceCentral.DeclaredThreshold.ComplianceTypes When creating declared thresholds for each threshold of a Compliance Definition during import, lists the supported Compliance Types to consider. chemSHERPA REACH,EL2011/65/EU,EL2015/863/EU,EL2011/65/EU_ANNEX_IV, EL2011/534/EU, EL2010/122/EU
emxMaterialComplianceCentral.AliasesForComplianceType.<COMPLIANCETYPE> Defines alias files (XML format) to load per compliance type while creating declared thresholds where <COMPLIANCETYPE> is a type defined by the emxMaterialComplianceCentral.DeclaredThreshold.ComplianceTypes property. Comma-separated list of XML file names
emxMaterialComplianceCentral.chemSHERPA2x.toolNameVersionID.article=chemSHERPA-A2.00.00@2.00.00 Defines the incoming data version for the chemSHERPA atricle tool. chemSHERPA-A2.00.00@2.00.00
emxMaterialComplianceCentral.chemSHERPA2x.toolNameVersionID.chemical=chemSHERPA-A2.00.00@2.00.00 Defines the incoming data version for the chemSHERPA chemical tool. chemSHERPA-A2.00.00@2.00.00
emxMaterialComplianceCentral.chemSHERPA.2.00.00.complianceDefinition=chemSHERPA:chemSHERPA_2.0 Defines which compliance definition is used. This parameter uses the version number of the chemSHERPA tool to find the mapping compliance definition. chemSHERPA 2.0
emxMaterialComplianceCentral.chemSHERPA2x.schemaDBVersion=X8.00ex1.0 Indicates the XML schema version for chemSHERPA v2.0. It is used for pre-populate and export to write out attribute schemaDatabaseVersion. X8.00ex1.0
emxMaterialComplianceCentral.chemSHERPA2x.substanceList.composition.identity=chemSHERPA_SubstanceList

emxMaterialComplianceCentral.chemSHERPA2x.substanceList.composition.authority=chemSHERPA

emxMaterialComplianceCentral.chemSHERPA2x.substanceList.composition.version=2.00.00

Defines the subtance list authority for composition data (Class D). This is supported only for the pre-populate and export. chemSHERPA_SubstanceList

chemSHERPA

2.00.00
emxMaterialComplianceCentral.chemSHERPA2x.materialList.identity=chemSHERPA_MaterialList

emxMaterialComplianceCentral.chemSHERPA2x.materialList.authority=chemSHERPA

emxMaterialComplianceCentral.chemSHERPA2x.materialList.version=2.00.00

Defines the material list authority for composition data (Class D). This is supported only for the pre-populate and export. chemSHERPA_MaterialList

chemSHERPA

2.00.00
emxMaterialComplianceCentral.chemSHERPA2x.substanceList.compliance.identity=DSL

emxMaterialComplianceCentral.chemSHERPA2x.substanceList.compliance.authority=IEC62474

emxMaterialComplianceCentral.chemSHERPA2x.substanceList.compliance.version=D18.00

Defines the subtance list authority for composition data (Class C). This is supported only for the pre-populate and export. DSL

IEC62474

D18.00