Enabling Support for IPC 1754

You can enable Materials Compliance Management to support the IPC 1754 standard.

The emxMaterialsComplianceCentral.properties file includes several properties that map query lists to compliance definitions. You do not need to change the values for these properties. 

emxMaterialsCompliance.IPC1754.QueryList.AD-QL1.0.AD-DSL2.0.Q1=IAEG:ADDSL-0817
emxMaterialsCompliance.IPC1754.QueryList.AD-QL1.0.AD-DSL2.0.Q2=IAEG:ADDSL-0817 Process
emxMaterialsCompliance.IPC1754.QueryList.AD-QL1.0.Q3=IAEG:Radioactive Material(s)
emxMaterialsCompliance.IPC1754.QueryList.AD-QL1.0.Q4=IAEG:Biocides(s)
emxMaterialsCompliance.IPC1754.QueryList.AD-QL1.0.Q5=Conflict Minerals:US Conflict Minerals

See Also
Configuring Properties
  1. Create or open the text file to contain customized properties. For more information, see Editing Properties Using MQL.
  2. To enable support for IPC 1754, follow these steps:
    1. Add or edit this line in the file used to import properties into a page object: 

      emxMaterialComplianceCentral.IPC1754Support

    2. Set the value for this property to on to enable support, or off to disable support.
  3. To determine what happens during an import if the amount with the UOM set to Unknown is missing, follow these steps:
    1. Add or edit this line in the file used to import properties into a page object: 

      emxMaterialComplianceCentral.IPC1754.MissingAmount

    2. Set the value for this property to error or warning .
  4. When finished updating the text file with all properties you want to modify, including the ones shown here, use the text file to modify the emxMaterialsComplianceCentral.properties page object. For more information, see Editing Properties Using MQL.