Compliance Report

The Compliance Report displays compliance information for a selected enterprise part and the parts in its EBOM. The Compliance Report can be generated for a single enterprise part, MEP, material declaration (containing a reported part), or reported part.

Required access roles:

  • Baseline: Reader, Author, Leader
  • App-specific: Compliance Reviewer, Compliance Engineer, Senior Compliance Engineer

Use the Compliance menu to access this report. You can find this menu on the toolbar of any of these pages:

  • Properties page for a part
  • Compliance View page for a part
  • Equivalents category for a part
  • Compliance Portfolio app category for Materials Compliance Management
  • Bill Of Materials for the part

To generate the report, click Compliance > Reports > Compliance Report.

Field NameDescription
Part Name The name of the part. Click the name to view its properties.
Part RevisionThe revision level of the part.
Part DescriptionThe description of the part.
Part Revision Date The date on which this part was last revised.
Type The object type.
State The state of the EBOM configuration.
Weight (Reference)The reference weight of the part from the EBOM relationship.
Unit Of Measure The base unit of measure.
WeightThe calculated weight of the part from the EBOM relationship.
Absolute Weight Deviation The % deviation (0 to 100%) between the calculated weight and the reference weight, which is calculated depending on whether the calculated weight is greater than, equal to, or less than the reference weight:

If the calc weight < = ref weight, the deviation = 100 * (1 - calc weight/ref weight) - calc weight

If the calc weight > ref weight, the deviation = 100 * (1 - ref weight/calc weight) - calc weight.

Compliance Information:
Part NameThe part name.
RevisionThe revision level for the part.
PlantThe plant that manufactures the part.
Part Description The part description.
Level The part level in the BOM.
Compliance Definitions The page displays a column for each compliance type available. The column shows the compliance for the part. Values are "Yes", "No", "Contains Unreported Parts", and "Unreported". The compliance type name is prefixed to the compliance definition name with ":" separating the names.
Compliance Indicator The EEE compliance indicator.
EU PackagingWhether the part meets EU packaging compliance.
US Packaging.Whether the part meets US packaging compliance.
ROHS ExemptionsAny ROHS exemptions. The compliance type is prefixed to the compliance application name with ":" separating the names.
Packaging ExemptionsWhen the packaging data management option is used, this indicates whether there are packaging exemptions. The compliance type is prefixed to the compliance application name with ":" separating the names.
Note: Your Business Administrator can configure this report to include additional rolled up enterprise compliance values.