Generating the Part Materials Report

The Part Materials Report displays information about the materials associated with parts in the BOM for a selected set of compliance definitions.

The report analyzes the selected equivalent configuration of enterprise parts, meaning that if an enterprise part has a selected equivalent MEP it analyzes the structure of the MEP to find materials. If an enterprise part does not have a selected equivalent MEP, then the report analyzes the enterprise part structure, which are the enterprise parts and materials directly associated with the enterprise part.

The Part Materials Report can be generated for one or more enterprise parts, MEPs, material declarations (containing reported parts), and reported parts.

Required access roles:

  • Baseline: Author, Leader
  • App-specific: Compliance Engineer, Senior Compliance Engineer

Use the Compliance menu to access this report. You can find this menu on the toolbar of any of these pages:

  • Properties page for a part
  • Compliance View page for a part
  • Equivalents category for a part
  • Compliance Portfolio app category for Materials Compliance Management
  • Bill Of Materials for the part

  1. Click Compliance > Reports > Part Materials.
  2. Select the Material Weight Unit of Measure for the report.
  3. Click Done.
    The part materials report is generated. See Part Materials Report.