MCO start date default value
As part of MBOM generation, MBOM Pending relationships are automatically created and a MCO is automatically created. The auto-created MCO is used as the context change order for CFF date effectivity. By default, the start date is infinite.
All the MBOM Pending relationships that are auto-created are updated with the MCO start date. The start date is stamped on the MBOM pending proposed date effectivity attribute provided by the CFF interface.
emxMBOM.MCO.DefaultEffectivityDate
After MCO auto-generation and pending MBOM generation, you can modify the MCO start date, which reflects on all corresponding MBOM Pending relationships.
Reversal date offset for a DCO
A DCO and MCO cannot be active for the same plant at the same time.
The MCO will be pending until the reversing DCO is effective. The start
effective date of the reversing DCO is the same as the end effective
date of the DCO that applied the changes. This property determines the
amount of time between the start effective date of the reversing DCO
and the start date of the pending MCO. The value must be an integer:
emxMBOM.Common.DCOReversalDateOffset
DCR start date offset
You can set the number of days for the MCO-2 (Reverse change order)
start offset for the DCR process.
emxMBOM.Deviation.DCO2.StartDateOffset
Compare value of MCO_OUT
This property is used to compare the value of the MCO_OUT attribute
on MBOM relationship.
emxMBOM.MBOM.Removed