Editing or Loading Sweep Mesh Parameters

You can edit Sweep mesh parameters or load values from a saved Sweep mesh rule.

The Element order, Mesh size, and some of the layer parameters are also available in the Sweep 3D Mesh dialog box. You can edit these parameters in either location.

If you load parameters from a mesh rule, any subsequent changes are saved and used only for the current mesh.

Before you begin: You must be in the process of editing a sweep mesh. To load mesh parameters, a saved mesh rule must exist.
See Also
Creating Sweep 3D Meshes
Checking the Mesh
  1. From the Sweep 3D Mesh dialog box, click Edit all parameters.
    The All Parameters dialog box appears.
  2. To load parameters from a saved meshing rule:
    1. Click .
      The Object Selection dialog box appears.
    2. Select one of the following tabs:

      • From Search to select a meshing rules document from all the meshing rules documents stored in the database.
      • From File to import a meshing rules document stored on your computer.
      • From Session to select a meshing rules document from the meshing rules documents already loaded in your session.

    3. Click OK in the Object Selection dialog box.

    Note: Only rules that were created for the sweep mesh type are available for selection.

    The All Parameters dialog box displays the mesh parameters defined in the selected document. The rule name is displayed in the Initialize with field.

    The context menu on the Initialize with field allows you to Reload the saved rule parameters to replace any edits you make after loading a rule.

  3. Optional: Click to save the parameters of the current mesh part to a reusable meshing rule.
    The Rule Export dialog box appears and allows you to name the rule.
  4. Specify the Mesh parameters.

    For more information about the available parameters, see Basic Mesh Parameters.

  5. Specify the Geometry parameters.

    For more information about the available parameters, see Geometry Parameters.

  6. Specify the Quality parameters.

    For more information about the available parameters, see Quality Parameters.

  7. Specify the Feature parameters.

    For more information about the available parameters, see Feature Parameters.

  8. Click one of the following:
    • OK to save your changes and to close the dialog box.
    • Cancel to cancel your modifications and to close the dialog box.
    The All Parameters dialog box closes, and you are returned to the Sweep 3D Mesh dialog box.