Create an End-Start Link

You can create an end-start link between two operations of the same system. The link specifies that the first operation must end at the same time that the second one starts.

  1. From the Authoring section of the action bar, click Create End-Start Link .
  2. Select two operations in the order of the following constraint:
    The first operation must end at the same time that the second one starts.
  3. Optional: In the Set Delay dialog box, enter a fixed delay between the end of the first operation and the start of the second one, then click OK.

    Note: To edit the delay, double-click the arrow in the Process Gantt or right-click the arrow and click Constraint Properties .

The end-start link is created:

  • In the Process Gantt

  • In the System Editor

Tips:
  • If arrows do not appear in the System Editor:
    1. From the Tools section of the action bar, click App Options .
    2. In the App Options panel, select Display Time Constraints , then click Refresh System Editor .

 

See Also
Creating Time Constraint Links Between Operations
Constraint Properties Panel