Managing Workplan Operation Assignments

If a System-Workplan scope exists, you can assign one or more workplan operations to a selected line-balancer system using the Assignments Manager command. You can also unassign workplan operations that are already assigned to the line-balancer system. The workplan operations that are available for assignment are derived from the System-Workplan scope definition.


Before you begin: Open your workplan and line-balancer system structures and start Process Planning.
See Also
About System-Workplan Scope
Final Assembly Workflow
  1. From the Authoring section of the action bar, click Assignments Manager .
  2. Select the line-balancer system.

    The Assignment Manager panel appears showing the current and potential workplan operation-assignments of the selected system.

    Assigned Workplan Operations Area
    It lists the workplan operation that are already assigned to the selected system.
    In the example above, one workplan operation is already assigned to the selected system.
    Assignable Workplan Operations Area
    It lists workplan operations that are not assigned, but can be assigned to the selected system.
    The Parent System column identifies the parent system of each assignable workplan operation.
    Any operation that has suboperations has a colored background in the list to indicate that it is a parent operation.
  3. You can manage the assignments as follows:
    • Assign a workplan operation: from the Assignable Workplan Operations area, click a workplan operation in the Unassigned Workplan Operations list to assign it to the system by clicking Assign Selected Workplan Operations . The workplan operation is added to the list in the Assigned Workplan Operations area.
      Note: When you assign a parent operation, its child operation are also assigned. However, only the parent operation appears explicitly in the Assigned Workplan Operations list.
    • Unassign a workplan operation: from the Assigned Workplan Operations area, click a workplan operation in the list to unassign it from the system by clicking Unassign Selected Workplan Operations . The workplan operation is added to the list in the Assignable Workplan Operations area.
    • Delete a linked line balancing operation and unassign the workplan operation: click the red cross icon.
    • Filter attribute content: click Filter to filter the content of one or several attribute columns. A blank box appears in which you can specify the data to filter. Then, if you select a column header, the entire column is filtered. To deactivate the filter(s):
      • On one column: click Filter again
      • On all columns: click Clear All Filters.
    • Customization: click Attributes Customization to customize attribute columns. In the dialog box that appears, select the Object Type, then move one or more available attributes from the Available Attributes column to the Displayed Attributes column. Click OK to display the new column corresponding to the selected attributes in the Assignment Manager panel .
  4. Close the Assignment Manager panel to take into account any modifications made to the workplan operation to system assignments.