Creating a Plane Through a Point and a Line

You can create a plane passing through a point and a line.

Before you begin: You must a 3D Shape containing geometry.
  1. From the Create section of the action bar, click Plane .
  2. Select Through point and line.
  3. In the Point box, select a reference point.

    Note: The point must neither ly on the reference line nor on its prolongation.

  4. In the Line box, select a reference line.
    A plane passing through the point and the line is displayed.

  5. Click OK to create the plane.
    The plane (identified as Plane.xxx) is added to the tree.