-
In the
First Limit box, enter enter a value to define
the length of the pad.
-
In the
Second Limit box, select the face of the pad
on which the selected profile lies.
Selecting a second limit is mandatory.
-
In the
Draft Angle box, enter the angle value for the
draft.
-
From the
Neutral element list, select
Second limit to define the neutral
element .
-
Select the respective check boxes and enter a radius value for each edge type
to define the three fillets as per the requirement.
-
Lateral radius: defines the fillets on
vertical edges.
-
Top radius: defines the round corner fillets.
-
Bottom radius: defines the fillets on the
edges of the second limit.
|