-
Select the element you want to thicken, that is the extrude element.
-
In the 3D area, the arrows that appear on the extrude element indicate the first offset
directions. If you need to reverse a direction, click the corresponding
arrow.
-
Select the
Smoothing mode from the following types:
-
None:
No smoothing is applied. This is the default option. The Max deviation box is unavailable.
-
Manual:
Smoothing is applied as per the maximum deviation. The default value is 0.1
mm.
-
Automatic:
Smoothing is applied automatically.
-
Click
OK.
The surface is thickened. The tree is updated.
|