Creating Removed Multi-sections Solids

You can sweep one or several planar section curves along a computed or user-defined spine and then remove this material to create a lofted solid material. The material can be made to respect one or more guide curves.

See Also
Creating Multi-sections Solids
About the Removed Multi-Sections Solid
  1. From the Model section of the action bar, click Removed Multi-sections Solid .
    The Removed Multi-sections Solid Definition dialog box appears.
  2. Select both section curves as shown Sketch.3 and Sketch.4:
    They are highlighted in the work area.

  3. Select Closing Point 2 as shown on Section 2 to redefine the closing point.


  4. Click Closing Point 2 arrow to reverse the direction.


  5. It is possible to edit the feature reference elements by first selecting a curve in the dialog box list then choosing a button to either:
    • Remove the selected curve
    • Replace the selected curve by another curve.
    • Add another curve.
  6. Click OK to create the removed multi-sections solid.
    The feature (identified as Multi-sections Solid.xxx) is added to the tree.