-
Select the required interference from the interference simulation result list.
The 3D geometry is re-framed displaying the interference curves for
clash or contact interferences. The movable
annotation on the selected interference instance for clash or clearance appears.
-
Move the slider to adjust the opacity of the objects that are not a part of the
selected metric.
By default, the opacity is 10%. The modified opacity value is persisted.
- Click
 to apply full opacity (the opacity value of
3D objects) to non-interfering objects. Click again to apply the previous opacity value.
- Click
 to apply full transparency to
non-interfering objects. Click again to apply the previous opacity value.
- When you reopen the interferences using Analyze
interference
 , previously selected interferences are selected and previously
applied opacity is applied.
- You can also specify the transparency value in the
Transparency box under
Interfering Parts, available at
.
-
Create a change request for the interference metric.
-
Create an issue for the interference metric.
-
Select the required values from the User status and the
Analysis status lists based on the analysis of the
selected interference.
You can select several instances and change their analysis status.
-
Update the interference simulation.
You can right-click any instance in the interference simulation result list
and select Refresh to refresh the update status and
instance names without updating the interference simulation.
- Optional:
Enter a comment in the Description box.
You can also change the contextual name.
-
Use the App Options panel to do the following:
- Apply colors to the instances
- Re-frame on the clashing parts or on the interference area
-
To generate an interference simulation report , right-click the interference simulation result list and
select either of the following:
- Export Selected: To export
the selected interferences in the interference simulation result
list.
- Export Filtered: To export
the interferences filtered by applying filters on required columns.
-
To play the Interference Check for Dashboard experience in 3DPlay Web App, from the Compass, click 3DPlay Web App.
|