Viewing Interference in VR Mode

You can visualize the interferences using Head Mounted Display (HMD) in VR mode.

Before you begin:
  1. From the AR-VR section of the action bar, click the 3D Validation HMD to browse the interferences.
    • The interferences are displayed in VR mode with two controllers.
    • By default, the navigation mode is activated.
  2. Press the side (grip) button on the controller in a dominant hand to switch to the presentation mode.
  3. On the controller in a non-dominant hand, press to start the presentation mode.
    The 3DEXPERIENCE window and the HMD Mirror window display the interference in a presentation mode.
  4. Use the navigation buttons on the controller in a dominant hand to check all the interferences in a presentation mode.

    If the interferences are displayed in VR mode:

    • The current viewpoint is modified for better display the interference. If the distance between the new viewpoint and the geometry is less than 30cm, the object is moved to 30cm for easy review.
    • In the presentation mode, if you modify the viewpoint on the desktop, the viewpoint in the virtual environment is also modified.
    • The name of the interference is displayed along with the user status. If the user status is not defined, the system status is displayed.
    • While analyzing interferences, if material is applied to a part and the Material option is activated for the viewer:
      • On non-interfering parts, the transparency is not applied.
      • On interfering parts, colors are not applied.