Viewing Interferences in a Presentation Mode

You can browse the interferences one after another in a presentation mode.

Before you begin: Open a data with at least one interference.
  1. From the Standard Area of the action bar, click Presentation Mode .

    You can also press Shift + F5.

    • The selected interferences are displayed in a presentation mode. If no interference is selected, the first interference in the interference result list is displayed.
    • The name of the interference, followed by its rank among the total number of interferences, is displayed on the upper-left corner of the work area. The second line displays the user status. If not defined, the system status is shown.

      You can expand the panel to check the Analysis status, Previous status, and Description, if specified in the interference list.

      Note: When you select several interferences, the information panel is not shown.

  2. To display the next interference simulation metrics, click > button on the right-hand side of the work area.

    You can also use the right or down arrow keys, or right-click in the work area and select Display Next Item .

  3. To display the previous interference from the interference list, click < button on the left-hand side of the work area.

    You can also use the left or up arrow keys, or right-click in the work area and select Display Previous Item .

  4. To exit the presentation mode, press Esc or click on the upper-right corner of the work area.

    You can also right-click in the work area and select Exit .