PCF Generation Weld Attribute Values

This section describes the PCF Generation Weld Attribute Values table and how you can customize it.

This page discusses:

Overview

The PCF Generation Weld Attribute Values table provides the list and the value of the attributes for each type of weld.

In Data Setup, this mapping table should be assigned to:

The PCF Generation Weld Attribute Values item in the resource table of Piping/Tubing Design Resources.

Rule Customization

Part of a typical PCF Generation Weld Attribute Values table is shown below.

ISOWeldType ISOAttributeNameISOAttributeValue
BUTT_BUTT_WELD SKEY WF
BUTT_BUTT_WELD CATEGORY ERECTION
BUTT_BUTT_WELD ITEM-CODE WELD
BUTT_BUTT_WELD ITEM-DESCRIPTION WELD
BUTT_BUTT_WELD REPEAT-PART-NUMBER WELD
BUTT_BUTT_WELD END-CONNECTION EQUIPMENT
BUTT_BUTT_WELD END-POSITION OPEN
BUTT_BUTT_WELD INSULATION ON
BUTT_BUTT_WELD INSULATION-SPEC FG
BUTT_BUTT_WELD TRACINGON
BUTT_BUTT_WELD TRACING-SPECFG
BUTT_BUTT_WELD ANGLE0
BUTT_BUTT_WELD DETAIL-SKETCH-IDENTIFIERUSER-DEFINED
BUTT_BUTT_WELD REPEAT-WELD-IDENTIFIERUSER-DEFINED
BUTT_BUTT_WELD STATUSSTANDARD
BUTT_BUTT_WELD WELD-ATTRIBUTE1USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE2USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE3USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE4USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE5USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE6USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE7USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE8USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE9USER-DEFINED
BUTT_BUTT_WELD WELD-ATTRIBUTE10USER-DEFINED
BUTT_BUTT_WELD WELD-REMARK-NUMBERUSER-DEFINED
BUTT_BUTT_WELD WELD-SPECUSER-DEFINED
BUTT_BUTT_WELD THICKNESS/RATINGUSER-DEFINED
BUTT_BUTT_WELD SUPPORT-WELD-PREFIX-ERECTIONUSER-DEFINED
BUTT_BUTT_WELD SUPPORT-WELD-PREFIX-FABRICATIONUSER-DEFINED
BUTT_BUTT_WELD WELD-PREFIX-FABRICATIONUSER-DEFINED
BUTT_BUTT_WELD SUPPORT-WELD-PREFIX-OFFSHOREUSER-DEFINED
BUTT_BUTT_WELD WELD-PREFIX-ERECTIONUSER-DEFINED
BUTT_BUTT_WELD WELD-PREFIX-FABRICATIONUSER-DEFINED
BUTT_BUTT_WELD WELD-PREFIX-GENERALUSER-DEFINED
BUTT_BUTT_WELD WELD-PREFIX-OFFSHOREUSER-DEFINED
BUTT_BUTT_WELD WELD-THICKNESS-RATINGUSER-DEFINED
BUTT_SOCKED_WELD SKEYWF
BUTT_SOCKED_WELD CATEGORYERECTION
BUTT_SOCKED_WELD ITEM-CODEWELD
BUTT_SOCKED_WELD ITEM-DESCRIPTIONWELD
.........

There are three columns in the table:

ColumnValueDescription
ISOWeldTypeIsogen weld type.
ISOAttributeNameAttribute name of the weld type.
ISOAttributeValueAttribute value.

Sample Resource File

The default location of Piping-ISOWeldAttributeValues.xls is

..\win_b64\startup\EquipmentAndSystems\Piping\DesignRules.