Inserting a Symbol on Another Symbol

You can insert a symbol and connect it to another one.

Before you begin: Open an existing diagram view containing:
  • A logical reference under the Logical node
  • A route between two symbols
  1. In the tree, right-click the logical reference and select Insert Existing Logical Component.
    The Select an existing logical component dialog box appears.
  2. Click From Session tab, and click Retrieve Loaded Data.
  3. In the list, select the valve reference.

    Important: You can insert an existing valve reference from a catalog or existing in session.

  4. Click OK to close the Select an existing Logical component dialog box.
    The Route Command dialog box appears.
  5. Move the symbol over the other one.

    Your pointer turns to a hand when a port is selected:

  6. Click to validate the insertion.
    The symbol is connected.



    Note: The inserted symbol can be rotated to make coincident connector ports.