Sheet Metal for Hydro-formed Parts: Display | ||
| ||
Characteristic Curves
- Clear all Check Boxes
- Removes the check mark from all check boxes
on this tab.
By default, this option is cleared.
- Check all folded
- Removes the folded mark from all check boxes
on this tab.
this option is cleared.
- Check all unfolded
- Removes the unfolded mark from all check boxes
on this tab.
this option is cleared.
Flange Features
- Brake-formed
- Specifies whether the features
should be seen in folded or unfolded 3D views of brake-formed surface
flanges.
By default, the value of each check box is specified in the standards.
- Hydro-pressed
- Specifies whether the features
should be seen in folded or unfolded 3D views of hydro-pressed surface
flanges.
By default, the value of each check box is specified in the standards.
Stamping Features
- Flanged Hole
- Specifies whether the features
should be seen in folded or unfolded 3D views of flange holes.
By default, the value of each check box is specified in the standards.
- Bead
- Specifies whether the features
should be seen in folded or unfolded 3D views of beads.
By default, the value of each check box is specified in the standards.
- Circular Stamp
- Specifies whether the features
should be seen in folded or unfolded 3D views of circular stamps.
By default, the value of each check box is specified in the standards.
- Surface Stamp
- Specifies whether the features
should be seen in folded or unfolded 3D views of surface stamps.
By default, the value of each check box is specified in the standards.
- Flanged Cutout
- Specifies whether the features
should be seen in folded or unfolded 3D views of flange cutouts.
By default, the value of each check box is specified in the standards.
- Stiffening Rib
- Specifies whether the features
should be seen in folded or unfolded 3D views of stiffening ribs.
By default, the value of each check box is specified in the standards.
- Curve Stamp
- Specifies whether the features
should be seen in folded or unfolded 3D views of curve stamps.
By default, the value of each check box is specified in the standards.
- User Stamp
- Specifies whether the features
should be seen in folded or unfolded 3D views of user stamps.
By default, the value of each check box is specified in the standards.
- Other Stamping Feature
- Specifies whether the features
should be seen in folded or unfolded 3D views of other stamping features.
By default, the value of each check box is specified in the standards.