Solid

The Solid tab lets you customize options for Civil Engineering 3D Design.

This page discusses:

Thread/Tap

Display symbolic representation
Select the Display symbolic representation check box to show a texture representing the thread / tap on its faces.

By default, This check box is cleared.

Main diameter used as reference for standard management
Select the Main diameter used as reference for standard management check box to enable the main diameter mode in the part.

By default, This check box is cleared.

Features color

Inherit colors from surface or reference objects
Select the inherit colors from surface or reference objects check box to inherit the input surface colors in the surface-based features and input reference object colors in the pattern and mirror features.

Clear this check box to reset the color properties to default solid colors for these features.

This option is available for the commands Close Surface , and Sew Surface . See Part Design User's Guide: Surface-Based Features: Creating Close Surface Features , and Part Design User's Guide: Surface-Based Features: Creating Sew Surface Features .

You can interactively switch between the two options while working on these commands.

By default, This check box is selected.

Technological Results

Display Technological Result data as knowledge Parameters
Select the Display Technological Result data as knowledge Parameters check box to retrieve the technological result data as knowledge parameters.

By default, This check box is cleared.

Dialogs appearance

Use dialogs with new appearance
Select this check box to change the appearance of the dialog boxes.

Clear this check box to switch to the classic dialog boxes.

By default, This check box is selected.