Motion Trace Options
- Show Point
- Provides the color and symbol for each point within a simulation trace, if
Show point is checked.
By default,
Show point is cleared. The initial appearance settings for
points define Coloras white and
Symbolas X.
- Show Line
- Provides the color, type of line, and line thickness for each simulation trace, if
Show Line is checked.
By default,
Show Line is checked. The initial appearance settings for lines
define Color as white, Typeas
1, and Thickness as
1:0.13mm.
- Show Axis
- Provides the color, line type, and thickness for the axis of each simulation trace, if
Show Axis is checked.
By default,
Show Axis is cleared; the initial appearance settings for axes
define Color as white, Typeas
1, and Thickness as
1:0.13mm.
- Delete path when simulation starts again
- You can choose to keep or create new paths when the simulation restarts.
By default,
the box is checked; when the simulation restarts, this option deletes the
path. - Show legends
- When selected, any of the selected items below appear on the simulation.
By default,
the box is checked. - Name
- The name of the motion trace appears on the simulation.
By default,
the box is checked; the name appears. - X, Y, Z
- The X, Y, Z coordinates appear on the motion trace.
By default,
the box is cleared; the coordinates do not appear.
- Yaw, Pitch, and Roll
- The Yaw, Pitch, and Roll values appear on the motion trace.
By default,
the box is cleared; the values do not appear. - Time
- The time of the motion trace appears on the simulation.
By default,
the box is checked; the time appears.
|