Limits
- All around overrun
- Defines the minimal limit between the constructed geometry and its related
geometry.
By default, the value is:
- 0.1 mm for Small range
- 10 mm for Normal range
- 1e+003 mm for Large range
Automatic Creation
- Center point
- Defines whether all the center point constructed geometry is automatically
created or not, for circle center, sphere center.
By default, this check box is cleared.
- Center axis
- Defines whether all the center axis constructed geometry is automatically
created or not, for cylinder, cone.
By default, this check box is cleared.
- Center plane
- Defines whether all the center plane constructed geometry is automatically
created or not, for slot.
By default, this check box is cleared.