Dimensions
- Dimensions for which last update failed
- Select a color for the dimensions for which the last update failed.
 By default, this option is selected and the color is specified to pink.
- Non associative dimensions (on 3D)
- Select a color for dimensions that are not associative to 3D geometry.
By default, this option is selected and the color is specified
to gray.
- Isolated dimensions
- Select a color for dimensions that are not linked to any geometry.
By default, this option is selected and the color is specified to dark blue.
- Dimensions converted to graphical elements
- Select a color for dimensions that have been converted to graphical elements.
By default, this option is selected and the color is specified
to dark green.
- Fake dimensions
- Select a color for fake dimensions.
By default, this option is selected and the
color is specified to brown.
- Dimensions driving 2D geometry
- Select a color for dimensions driving the 2D geometry.
By default, this option
is selected and the color is specified to blue.
- Dimensions generated from 3D constraints
- Select a color for dimensions generated from 3D constraints.
By default, this
option is selected and the color is specified to green.
- Technological feature dimensions
- Select a color for technological feature dimensions.
By default, this option is
selected and the color is specified to dark mauve.
- True dimensions
- Select a color for true length dimensions.
By default, this option is selected
and the color is specified to violet.
- Dimensions on non-visible geometry
- Select a color for the dimensions that are created on a geometry that is not visible (that
is, geometry hidden in 3D).
By default, this option is not
selected and the color is specified to light blue.
- Clipped dimensions
- Select a color for clipped dimensions.
By default, this option is selected and
the color is specified to dark yellow.
Geometries
- Generated elements
- Select a color for elements that have been generated from the 3D.
By default, this option is not selected and the color is specified to dark gray.
Callouts
- Callouts for which last update failed
- Select a color for callouts for which the last update failed.
By default, this
option is selected and the color is specified to dark pink.
- Isolated callouts
- Select a color for callouts that are not linked to any view.
By default, this
option is selected and the color is specified to dark blue.
Weldings
- Weldings for which last update failed
- Select a color for welding symbols for which the last update was unsuccessful.
By default, this option is selected and the color is specified
to dark pink.
Patterns
- Contour thickness for pattern areas with a size lower than the
pitch
- Select a thickness used to point out the pattern area, when the size of this area is lower
than the pitch (so that no hatch or dot can be displayed).
By default, this option is selected and the thickness is
specified to index 5.
|
command. For these last ones, the color
displayed is the one selected Dimensions generated from 3D
constraints. In the case of Technological Results
generated from the 3D thread, these dimensions are displayed with the
default color.