Display

Hidden Buildings

Show building outline when building is hidden: Select this check box to display the wireframe outline of your building to display when the building is hidden by a Show/Hide command.
Note: This setting impacts all mass features globally, including the active building.
Show building while structural member editing: Select this check box to display the building while editing the structural member.

Select the desired option:

-2, -1, G, 1, 2: Select this option to use the European story labeling scheme (EU), which includes the ground floor.
-2, -1, 1, 2: Select this option to use the American story labeling scheme (US), which does not include the ground floor.

Buildings: All the solid portions of the building excluding catalog structural members. Building includes the mass, all walls, all slabs, and the roof.
Space Volumes: The space volume, that is, the geometry of space, elevators, and stairwells contained within the walls. To see Space Volume, from the action bar, click Show/Hide Building to hide the building and click Show/Hide Spaces to show space volumes.
Site: The site volume without any restrictions.
Site Volumes: The allowable building volume, that is, the remaining site volume after applying the required restrictions.
Site Restrictions: The individual restrictions (Setbacks, Vertical Setbacks, and Easements) that the user applies to the site to obtain site volume.
Catalog Members: The catalog structural members in a building project. Catalog structural members include catalog beams, columns, braces, catalog beam patterns, and bar joists.

Font Size: Sets the default font size of the structural grid label text.
Font: Sets the default font of the structural grid label text.
Text Rotation: Sets the default angle by which the grid label text is rotated.
Bubble Type: Sets the default bubble type of the grid label.
Leader Length: Sets the default leader length of the grid label.
Gap: Sets the default gap between the end of the grid line and the start of the grid extension lines.
Jog Start: Sets the default length of the grid label extension lines before the jog begins.
Jog Angle: Sets the default angle of the extension line jogs.