Sectioning

Section Mode

Specifies how the product should be displayed when the Section command is launched.

Cross view

Displays objects in their entirety, with just a contour indicating where the sectioning is applied.

Cut view

Displays cut objects.

By default, Cut view is selected.

No contours and capping computation during manipulation

Shows the section result at the end of the section plane manipulation only. This improves the system performance.

By default, this check box is cleared.

Export Mode

Specifies how sections should be exported.

Use polylines for export

Exports sections as polylines. You can use this export mode when exporting a section as a new 3D shape or drawing representation, or to an existing product or 3D shape representation.

Use curves for export

Exports sections as curves. You can use this export mode when exporting a section as a new 3D shape representation, or to an existing product or 3D shape representation.

By default, Use curves for export is selected.

Default Graphic Properties

Specifies the default graphic properties which should be used to represent section planes in slice mode and box mode.

Section Plane Color

Defines the color used to represent the section plane.

By default, the color is set to grey.

Section Plane Transparency

Defines the opacity of the section plane.

Tip: To prevent the section plane from disappearing do not set the opacity to 255.

By default, the transparency is set to 128.

Contour Color

Defines the color of the section contours.

By default, it is set to black.

Contour thickness

Sets the line thickness used to represent section contours.

By default, the thickness is set to index 1 (that is, 0.13 mm).

Contour Dominant

Enables the contours to be displayed dominantly even when they are overlapped by an object.

By default, this check box is selected.

Display Section Information in 3D

Displays the section information in the 3D area.

By default, this check box is selected.

Plane Visu Mode

Defines the visualization of the section plane. Select the desired option:

Contour with plane

Select this option to display the section plane and the section contour.

Contour with grid plane

Select this option to display the grid and the section contour.

Only contour

Select this option to display only section contour.

By default, the Contour with plane option is selected.