Expand

Select the Spot Fastener check box to display spot fasteners in the specification tree and in the 3D geometry area. The cross-highlight is supported to easily identify the components.

By default, this check box is cleared.

Select the Bead Fastener check box to display bead fasteners in the specification tree and in the 3D geometry area. The cross-highlight is supported to easily identify the components.

By default, this check box is cleared.

Select the Localization Fastener check box to display localization fasteners in the specification tree and in the 3D geometry area. The cross-highlight is supported to easily identify the components.

By default, this check box is cleared.

Select the Bundle Fastener check box to display Bundle fasteners in the specification tree and in the 3D geometry area. The cross-highlight is supported to easily identify the components.

By default, this check box is cleared.

Select the Use the accelerator mode by default check box to use indexing for expand operations by default. The last index build date is displayed on the upper-right corner of the tab.

By default, this check box is cleared.