Solid | ||
| ||
Thread/Tap
- Display symbolic representation
- Select the
Display symbolic representation
check box to show a texture representing the thread /
tap on its faces.
By default, this check box is cleared.
- Main diameter used as reference for standard management
- Select the
Main diameter used as reference for standard
management check box to enable the main diameter mode in the part.
By default, this check box is cleared.
Features color
- Inherit colors for surface or reference objects
- Select the Inherit colors for surface or reference objects check box
to inherit the input surface colors in the surface based features and input
reference object colors in the pattern and mirror features.
Clear this check box to reset the color properties to default solid colors for these features.
This option is available for the commands Close Surface
, and
Sew Surface
. See
Part Design User's Guide: Surface-Based Features: Creating
Close Surface Features , and Part Design User's Guide:
Surface-Based Features: Creating Sew Surface Features .
You can interactively switch between the two options while working on these commands. By default, this check box is selected.
Technological Results
- Display Technological Result data as Knowledge Parameters
- Select the
Display Technological Result data as Knowledge
Parameters check box to retrieve the technological result data as
knowledge parameters.
By default, this check box is cleared.
Dialogs appearance
- Use dialogs with new appearance
- Select this check box to change the appearance of the dialog
boxes.
Clear this check box to switch to the classic dialog boxes.