Interference Display | |
| |
Interference simulation preferred interface
- Work in interference simulation tab
- Opens the interference simulation or interference metric in an authoring tab.
By default, this check box is selected. - Work in navigation tab
- Opens the interference simulation or interference metric in a navigation tab.
Geometries
- None
- Select this check box to hide all interference geometries.
- Main interference type
- Select this check box to display interference geometries corresponding to
the interference system status. By default, this option is
selected.
- All clashes, contacts or clearances for each interference
-
Select this check box to compute and display the intersection curves corresponding to the clash zones, the contact zones, or the clearance zones at the same time when analyzing interferences.
By default, this check box is clear. Notes:- If clearances are displayed with triangles, for each group of connected clearance triangles, a minimum distance value is displayed in the work area.
- If clearances are displayed with areas, only a single minimum distance value is displayed in the work area.
- Clash
- Lets you specify how the clashes must be displayed in the work area. You can display the clash curve, clash volume, or clash curve and
volume. By default,
Curve and volume is selected.
- Clearance
- Lets you specify how the clearances must be displayed in the work area. You can display the clearances with triangles or area.
You can specify the accuracy value to use while displaying the area. By default, accuracy value is 10 mm.
By default,
Triangles is selected.
Quantifiers
- Penetration vector
- Select this check box to compute and display the penetration vector and the
numeric value in the work area. By default, this check box is selected.
- Clearances
- Select this check box to compute and display the minimum distance for
clearance. By default, this check box is selected.
Interfering Parts
- Color According to Instance
- You can choose colors for the parts in an interference. These colors are
applied when analyzing parts. By default,
: Indicates first instance 
: Indicates second instance - Color According to Interference
- Select this option to apply colors to the interfering parts depending on
their interference type.
: Represents clashes 
: Represents contacts 
: Represents clearances
- Transparency
- Applies transparency to interfering parts.
-
By default, the transparency values is 128.
Interference Icon
- Display Interference icon in 3D area
- Select this check box to display icons in the work area to denote interferences.
Customized Display
- Display customize instance names in multi list using Business Logic
- Select this check box to display customized instance names in the interference simulation multi list using business logic.
Display tooltip
- Display tooltip for multi list
- Select this check box to display tooltips for instances in the
interference simulation multi list. By default, this check
box is clear.