System Assignment Assistant

Assign under selected General operation

When this option is selected, the Operations list in the System/Operation area at the top of the System Assignment Assistant is replaced with an Operations list in the Products area, and another Operations list in the Fasteners area. Only General operations are proposed in these lists. Operations created during assignment are instantiated under the selected General operation in the Operations list.

If All Operations is selected in the Products/Fasteners operations list, a new Loading operation is created and instantiated under the selected system
If a General operation is selected in the Products/Fasteners operations list when assigning a product/fastener, the corresponding Loading/Point Fastening operation is instantiated under the selected General operation.

By default, the option is not selected.

Freeze Fasten steps after dispatch

This option allows the global planner to have a general behavior for freezing Fasten steps after they are dispatched by local planners.

If the option is selected, all dispatched Fasten steps are Frozen after the dispatch command is finished, so you do not need to switch to the Manufactured Item Definition app to freeze the dispatched Fasten steps.
If this option is not selected, no change is applied to the Frozen status of the dispatched Fasten steps:
- Already Frozen Fasten steps remain Frozen.
- Non-Frozen Fasten steps remain released.
By default, the option is not selected.