Display

Vision

You can select different colors for the following options:

• Peripheral Visual Limit
• Central Visual Limit
• Blind Spot.

Twin Segments (Reach and Inverse Kinematics Mode)

You can specify both color and transparency options for twin segments. You can choose to apply these display options to twin segments in 3D reach or Inverse Kinematics (IK) mode.

By default, the color and transparency options are those shown; the In 3D Reach Mode and In IK Mode check boxes are not cleared.

Loads

You can specify colors for Active and Inactive loads. You can choose to display the direction of the force of the loads; choose one of the following:

Load Arrow

Shows the forces acting on the hands.

Force Line

Shows the reactive forces, that is, the opposite of the load forces.

None

Does not show the load forces.

By default, shows the color options and the selected Load Arrow.

Offsets

Modify the color selection for the offset.

By default, the color options are those shown.

Forward Kinematics

You can modify the color assignments for the different degrees of freedom, DOF 1,2,3 . Specify a scale for reframe. In addition, if you select the Automatic reframe on selected segment check box, the 3D graphics reframe on any segment you select.

By default, the Automatic reframe on selected segment check box is cleared.